Remote Sensor Unit - Fujitsu Airstage J-II Series Design & Technical Manual

2-14. REMOTE SENSOR UNIT

„ MODEL: UTD-XSZX
„
The remote sensor unit allows for flexible temperature sensing for optimum temperature
control.
„ ELECTRICAL WIRING
„
● Remove the screws from the remote sensor, and remove the cover.
● Connect the cable to the remote sensor as shown below.
● Ensure that the wires do not contact each other.
Remote sensor
„ INSTALLATION
„
z When the cable is attached to the wall
„
● Remove the material covering the wiring penetration (thin material) in the cover of the sensor
unit with a pair of cutters. The cable passes through this hole.
● Now the remote sensor on the wall using the screws.
Screw
[M4 × 5/8(16)]
●
To indoor unit
Cable
Mounting hole dimensions
- (05 - 100) -
1-9/16 (40)
Unit : in. (mm)