Fujitsu Airstage J-II Series Design & Technical Manual page 745

8)Touch the [Setting] on the "Function Setting"
screen.
Function Setting
Address
Function No.
Setting No.
Back
NOTE: *1 When All is chosen by 5), and different set up
"Setting No." from two or more indoor units, [-]
is displayed on "Setting No."
10) Touch the [YES] of the verification screen.
Function Setting
Function setting will be performed. OK?
No
In case of OK
Function Setting
Address
Function No.
Setting No.
Back
When the data was normally set up on the indoor unit
„ FUNCTION DETAILS
„
Refer to 2-8. FUNCTION DETAILS.
9) Setting screen of "Setting No." is displayed.
[002–01]
[30]
[00] *1
Setting
Ex.) Function number: 30, Setting number: 01
When the [OK] is touched, the "Function Setting"
verification screen is displayed.
Yes
In case of ERROR
[002–01]
[30]
[01]
Setting
- (07 - 98) -
Set the Setting No. with the [▲] or [▼].
Function Setting
Address
Function No.
Setting No.
01
Cancel
Function Setting
Address
Function No.
Setting No.
Back
● When the data was not set up on the indoor unit ( [-]
is displayed.)
● Set up the data again according to the procedure in
step 6) to 9) above
[002–01]
[30]
OK
[002–01]
[30]
[ – ]
Setting