Fujitsu Airstage J-II Series Design & Technical Manual page 570

Signal
Amplifier
Network
Convertor
Network
Convertor for
L W
ORKS ®
ON
®
Modbus
Convertor for
VRF
®
BACnet
Gateway
(Hardware)
BACnet ®
Gateway
(Software)
External
Switch
Controller
Service Tool
Web
Monitoring
Tool
*1 Note: Different VRF series may be connected for each of the 4 VRF networks supported by the
unit, but different series may not coexist within the same network.
(VR-II Series, V-II Series and J-II Series can exist together on same network.)
*2 Note : For one VRF network system, total number of Touch Panel Controller, Central Remote
Controller, Modbus
Network Convertor for L
Maximum
connectable
Model
units in one VRF
network system
UTY-VSGXZ1 8
UTY-VTGX
Used for
connecting split
system : 100
UTY-VGGXZ1
UTY-VLGX 1
UTY-VMGX 9
UTY-VBGX 4
UTY-ABGXZ1 1
UTY-TERX
UTY-TEKX
UTY-ASGXZ1
1
UTY-AMGXZ1
®
Convertor for VRF, BACnet
W ® .
ON ORKS
- (06 - 06) -
Remarks
The signal amplifier is required when
1,640 ft.(500 m) or more in transmission
line length or connected unit exceeds
64units.
Total number
Max connectable Single split or Multi
of refrigerant
type : 16 units.
system and
Network
Max connectable Single split or Multi
convertor is
maximum 100. type in a UTY-VGGXZ1 : 16 units.
*2:Note
Max controllable indoor units : 128
Max.controllable VRF network system : 4
Max.controllable remote controller
groups : 1600 per 4 VRF network system
*1:Note
Max.controllable indoor unit : 1,600 per 4
VRF network system
Max.controllable groups : 1,600 per 4
VRF network system
Max connectable indoor units : 16
1 Service
Tool or 1 Web
PC : Locally purchased
Monitoring
USB adaptor is required.
Tool can be
connected.
Web Monitoring Tool: Internet explorer
6.0 or higher.
PC : Locally purchased
*1:Note
.
USB adaptor is required.
Up to 4 VRF network system can be
observed with one Web Monitoring Tool.
®
Gateway (Hardware) is 16, including one