Epson SC-T5400 Series User Manual page 137

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Settings item
Easy Adjustment
Paper Feed Adjust
Auto
Manual
Print length adjustment
Print Head Alignment
Auto
Manual
Advanced Media Setting
Platen Gap
Using the Menu
Settings value Explanation
Start Run this adjustment when there is a problem with print results, or
after registering custom paper settings.
Touch Start and the printer will run Paper Feed Adjust and Print Head
Alignment automatically.
"Optimizing Paper Settings (Media Adjust)" on page 48
U
Start Run this adjustment when streaks (horizontal banding or uneven
colors) appear in print results.
Start
For details on Auto, see the following.
Start
"Paper Feed Adjust (Auto)" on page 49
U
Run Manual if an error appears during automatic adjustment or you
are not satisfied with the automatic adjustment results.
"Paper Feed Adjust (Manual) Procedure" on page 198
U
Run Print length adjustment if you want to precisely adjust the
paper feed amount for printing drawings and other information.
"Lengths differ between the print results and print data" on
U
page 202
Start Run this adjustment when ruled lines are duplicated, lettering is
warped, or print results are grainy.
Start
For details on Auto, see the following.
"Print Head Alignment (Auto)" on page 49
U
Run Manual if an error appears during automatic adjustment or you
are not satisfied with the automatic adjustment results.
"Print Head Alignment (Manual) Procedure" on page 198
U
1.2 Displayed when Custom Paper is selected in Paper Type. When
registering Custom Paper, this is the Platen Gap (distance between
1.6
print head and paper) for the paper selected in Change Reference
Paper, so it does not normally need to be changed. Change this to a
2.1
setting that will widen the gap (a higher value) if print results are
smeared.
137