Printing Using The Hp-Gl/2 Or Hp Rtl; Mode From A Computer; Printer Settings; Basic Print Settings - Epson SC-T5400 Series User Manual

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing Using the HP-GL/2 or HP RTL Mode from a Computer
Printing Using the
HP-GL/2 or HP RTL
Mode from a
Computer
*
The printer can emulate
HP Designjet 750C) and HP RTL. This section describes
the settings of the printer and the settings in the CAD
application for printing while emulating.
* Not all functions are supported. If you will use an
untested application, test its output in advance.
c
Important:
The printer may not perform as expected if the size
of the data to be printed is extremely large.
Note:
CAD drawings can also be printed using the CAD/ line
drawing mode of the supplied printer driver. We
recommend printing from the printer driver when you
want to print with better image quality.
"Printing CAD Drawings" on page 61
U

Printer Settings

Change the printer settings for printing in the HP-GL/2
or HP RTL mode as necessary in the control panel of the
printer. The printer settings include basic print settings
such as the paper source and margins (Universal Print
Settings) and HP-GL/2 specific settings such as palette
settings (HP-GL/2 Unique Settings).

Basic Print Settings

A
Touch Settings - General Settings - Printer
Settings - Universal Print Settings from the
Home screen.
HP-GL/2 (compatible with
B
Check Paper Source and change the setting if
necessary.
The default setting is Roll Paper. When HP-GL/2
or HP RTL print data is sent, an error occurs if
paper is not loaded for the paper source set here.
C
Check the other items and make changes if
necessary.
See the following for more details on Universal
Print Settings items.
"General Settings - Printer Settings" on
U
page 145

HP-GL/2 Specific Print Settings

If you want to change HP-GL2 specific settings such as
rotating print data, merging lines, and changing the
Define Palette set in the application, use the following
procedure.
A
Touch Settings - General Settings - Printer
Settings - HP-GL/2 Unique Settings from the
Home screen.
B
Touch and change the settings of the desired
items.
See the following for more details on HP-GL/2
Unique Settings items.
"General Settings - Printer Settings" on
U
page 145
97