Enlarged Copy Menu (Sc-T5400 Series/Sc-T3400 Series/Sc-T3400N Series Only) - Epson SC-T5400 Series User Manual

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Enlarged Copy menu (SC-T5400 Series/SC-T3400
Series/SC-T3400N Series Only)
Displayed when an Epson A3 or A4 scanner is connected to the printer. Set scaling in this menu to enable enlarged
printing of the scanned documents.
"Making Enlarged Copies with an A3 or A4 Scanner (SC-T5400 Series/SC-T3400 Series/SC-T3400N Series
U
Only)" on page 111
*Default setting
Settings item
Copies
Color Mode
Original Size
Reduce/Enlarge
Auto Fit Page
Custom Size
Density
Using the Menu
Settings value
1 to 99
Black/White
*
Color
A4
A5
A3
B5
B4
Letter
13 x 18 cm (5 x 7 in)
*
On
Off
Actual Size
A0
US E (34x44in)
JIS B1
A1
US D (22x34in)
JIS B2
US C (17x22in)
A2
User-Defined
*
-4 to 4 (0 )
Explanation
Specify the number of copies.
Choose whether to do enlarged copying in color or in black and white.
Select the document size loaded on the scanner. The sizes available
vary with the scanner. Sizes other than those shown here cannot be
used.
Set On to enlarge the copy so that the short edge of the document fits
the width of the roll paper currently loaded in the printer.
If the short edge of the document is wider than the roll paper, this will
be printed at actual size.
If the printer is unable to detect the width of the roll paper, then an
error will occur when copying is started.
Select the output size. To the left of each size, the percentage of
enlargement of the selected document size is displayed.
A0, US E, and B1 are displayed only for SC-T5400 Series.
If the desired size is not in the list, set the desired size in
User-Defined.
Choose copy density.
165