Setting Procedures For Printing - Epson SC-T5400 Series User Manual

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide

Setting Procedures for Printing

Settings in Windows
A
Display the printer driver's Printer Settings tab
and adjust the following settings.
"Basic Operating Procedures (Windows)"
U
on page 51
B
Select Borderless.
Printing with the Printer Driver from Your Computer
C
For Borderless settings, select from Auto
Expand or Retain Size.
If Auto Expand is selected, select the amount of
enlargement from the following.
Max : 3 mm for left and 5 mm for right
(the image shifts 1 mm to the right)
Standard : 3 mm for left and right
Min : 1.5mm for left and right
Note:
Moving the slider towards Min decreases the image
enlargement ratio. Therefore, some margins may
appear at the edges of the paper depending on the
paper and printing environment.
D
When printing on roll paper, select the Advanced
tab, and configure the Auto Cut setting in the
Roll Paper Option area.
"About Roll Paper Cutting" on page 73
U
74