Epson SC-T5400 Series User Manual page 172

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Settings item
Original Type
Original Size
Auto Detect
ISO A
US-ANSI
US-ARCH
JIS B
ISO B
User-Defined
Top Offset
Image Quality
Contrast
Sharpness
Remove
Background
Bidirectional
Using the Menu
Settings value
*
Text & Image
Tracing Paper
Recycled
Blueprint
Blueprint Inverted
Watercolor Rendering
-
Display supported sizes for
originals
Display the Original Size
Input screen
*
0.0 to 100.0mm (0.0 )
*
0.00 to 3.94inch (0.00 )
*
-4 to 4 (0 )
*
-4 to 4 (0 )
*
-4 to 4 (0 )
*
On
Off
Explanation
Select the type in accordance with the loaded original.
The default setting of Auto Detect is recommended in most
situations. Note that, depending on the original, it may not be
possible to detect the width correctly even when the setting is Auto
Detect. Similarly, tracing paper and the optional carrier sheet are not
detected automatically. In such cases, change from the standard size
and specify a width of your choosing. If the desired size is not in the
options, then select User-Defined, and enter the length and width of
the original.
If you do not want to copy the top margin of the original, you can
adjust the top, and then copy the original. Enter the value for the
length from the top of where you want to start copying.
If the carrier sheet is loaded, set the value to 19 mm.
Set the contrast. Negative values (-) are weaker and positive values (+)
are stronger.
Set the sharpness. Negative values (-) are weaker and positive values
(+) are stronger.
Set the adjustment value for removing the background. Configure
this setting when you are scanning originals with colors or originals
that are thin or when removing unwanted backgrounds. Negative
values (-) are weaker and positive values (+) are stronger.
Setting this to On causes the print head to print while moving both
left and right. Setting this to Off reduces ruled line misalignment, but
printing takes more time.
172