Epson SC-T5400 Series User Manual page 160

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Settings item
Confirm Recipient
Email Server
Server Settings
Connection Check
Scan Options
Confirm Before Eject‐
ing Scanned Docu‐
ment
Correct Skewed Im‐
age
Document Feed Ad‐
justment
Image Stitching Ad‐
justment
Using the Menu
Settings value
On
*
Off
Off
POP before SMTP
SMTP-AUTH
*
On
Off
*
On
Off
*
-1.00 to 1.00 (0 )
*
-5 to 5 (0 )
Explanation
Set to On to be able to check the recipients before scanning the
original.
Select this when not setting an email server.
Authenticates on the POP3 server (receiving mail server) before
sending the email. When you select this item, set the POP3 server.
Authenticates on the SMTP server (outgoing mail server) when
sending the email. The mail server needs to support SMTP
authentication.
Able to check the connection with the email server.
Set to On to keep the original at the paper eject slot after it is scanned
and display the removal confirmation screen. If you want to eject the
original right after scanning it, set this to Off.
Automatically corrects a scanned image that is skewed, and then
saves it. The range of correction is from the origin to a width of 914.4
mm.
Enable this only if the Original Size or Scan Size has been set to Auto
Detect.
If the length of the original and the print results of the copied or
scanned files do not match, adjust the document feeding. If you want
to shorten the length of the print out, press the minus button. If you
want to lengthen it, press the plus button. Differences in length may
occur due to the type of paper used for printing.
"Paper Feed Adjust (Auto)" on page 49
U
Correct the position for image stitching if the scanned results are
misaligned.
"Image Stitching Adjustment" on page 216
U
160