Printing At Non-Standard Sizes - Epson SC-T5400 Series User Manual

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Windows
Mac
D
Check other settings, and then start printing.
Printing with the Printer Driver from Your Computer
Printing at Non-Standard
Sizes
Before printing at non-standard sizes, including vertical
or horizontal banners and documents with equal sides,
save the desired paper size in the printer driver. Once
they have been saved in the printer driver, custom sizes
can be selected in the application Page Setup and other
print dialogs.
The following sizes can be used.
Paper SC-T5400 Series
Width
SC-T3400 Series/
SC-T3400N Series
Paper 127 to 91000 mm
*
Length
*: The paper length can be longer when using an application
that supports banner printing. However, the actual print size
depends on the application, the paper size loaded in the
printer, and the computer environment.
c
Important:
❏ The smallest size supported by the printer is 89
mm wide × 127 mm long. When a smaller size
than this is set in Custom Paper Size... of the
printer driver, trim the unnecessary margins.
❏ For Custom Paper Sizes of a Mac, although you
can specify a large paper size which cannot be
loaded in this printer, it will not be printed
properly.
❏ The available output size is limited depending
on the application.
68
89 to 914 mm
89 to 610 mm