Epson SC-T5400 Series User Manual page 156

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Settings item
Palette B
Pen 0 to Pen 15
Pen Width
Pen Color
Restore default
HP-GL/2 Unique Set‐
tings
Memory Device Inter‐
face
Thick Paper
Self Check and Cleaning
Bidirectional
PC Connection via USB
USB I/F Timeout Setting
Using the Menu
Settings value Explanation
0.13 to 12.00 mm In Select Palette, selecting Palette B will print in accordance with the
settings defined here.
0 to 255
Settings details are the same as for Palette A.
No
Select Yes to restore all HP-GL/2 Unique Settings settings to the default
settings.
Yes
*
Select whether to permit (Enable) or not permit (Disable) connecting a USB
Enable
flash memory to the printer and then directly printing the data in the
memory.
Disable
*
If the paper is thick, the print head may scuff the print surface. Choose On to
Off
prevent scuffing. If On is set, the platen gap, which is the distance between
On the print head and paper, will widen. However, if the platen gap is already at
its maximum, then setting this to On will have no effect.
Off Self Check and Cleaning is a function to automatically perform a print head
clogging check and perform cleaning if there is clogging at times such as
*
when the power is turned on or before starting printing. Select the number
Once
of times to perform automatic cleaning when there is clogging. If Off is
Twice selected, both the check and cleaning will not be performed.
Three times
*
Setting this to On will cause the print head to print while moving both left
On
and right. Setting this to Off will reduce the ruled line misalignment, but
printing will take more time.
Off
*
Setting this to Enable allows access from a USB-connected computer.
Enable
Setting this to Disable does not allow access.
Disable
0 sec, or 5 to 300 sec If printing stops mid-way when the printer and computer are connected by
* a USB cable, set a longer time.
(60 )
156