Epson SC-T5400 Series User Manual page 67

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
"Basic Operating Procedures (Windows)"
U
on page 51
Mac
Open the page setup screen of the application
and check that this printer is selected in Printer
and check the paper size.
Select a paper size that does not have (Retain
Scale) or (Roll Paper Banner).
If the size is different, select the correct size from
the pull-down menu.
"Basic Operating Procedures (Mac)" on
U
page 57
Note:
In the case of an application without a page setup
menu item, you can set the paper size if you open
the Print dialog box from the Print menu item.
Printing with the Printer Driver from Your Computer
B
Display the Output Size input screen from the
Printer Settings tab of the printer driver.
Windows
Select Others... and then select Specify Size in
the displayed Output Size dialog box.
Mac
Select Specify Size.
C
Select the size specification method from Width,
Length, and Scale to and then enter the setting
value.
The print image is enlarged or reduced so that it
becomes the specified width, length, or scale
while maintaining the aspect ratio of the print
data.
67