Epson SC-T5400 Series User Manual page 46

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
How to Set
A
The currently set paper type is shown on the
screen displayed after loading cut sheet.
When changing Paper Type
Proceed to step 2.
When changing Paper Size without changing
Paper Type
Proceed to step 4.
When not changing either of them
Touch OK. You can start printing once Ready
appears on the screen.
Note:
The settings are confirmed if no operations are
performed for 90 seconds on the above screen. To
change the settings later, touch the following in
order from the Home screen and then configure the
settings.
Paper Setting - Cut Sheet(1 sheet) - Change Paper
Type/Paper Size
B
Touch Paper Type.
The following paper type selection screen
appears.
Loading and Setting the Paper
C
❏ Plain paper
❏ Coated Paper(Generic)
❏ Photo Paper(Generic)
❏ Tracing Paper
❏ Tracing Paper <LowDuty>
❏ Matte Film
❏ Blueprint Paper
46
Note:
The most recently selected three paper types are
displayed in addition to Others.
Select the paper type that matches the loaded
paper.
Epson Special Media
Select the same product name as the one shown
on the package of the paper.
Commercially available non-Epson paper
Select from the following commercially available
paper types.
To select a paper type that is not displayed on the
screen, touch Others.
Select a category and select the target paper type.
When a paper type is confirmed, the screen
returns to the one in step 1.
Note:
If you scroll downward in the category selection
screen, Custom Paper appears. To select custom
paper that has already been registered, touch
Custom Paper.