Epson SC-T5400 Series User Manual page 159

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Settings item
Advanced
Device Name
TCP/IP
Proxy Server
Email Server (SC-T5400M Series Only)
Shared Folder (SC-T5400M Series Only)
IPv6 Address
Link Speed & Duplex
Redirect HTTP to
HTTPS
Disable IPsec/IP Fil‐
tering
Disable IEEE802.1X
iBeacon Transmis‐
sion (SC-T5400M Ser‐
ies Only)
General Settings - Scan Settings (SC-T5400M Series Only)
*Default setting
Using the Menu
Settings value
*
Auto
Manual
Use
*
Do Not Use
*
Enable
Disable
*
Auto
10BASE-T Half Duplex
10BASE-T Full Duplex
100BASE-TX Half Duplex
100BASE-TX Full Duplex
*
Enable
Disable
Enable
*
Disable
Enable
*
Disable
*
Enable
Disable
Explanation
Set the name of the printer to use on the network.
Automatically assign the printer IP address using DHCP functionality
in the router.
Select this to manually assign a fixed IP address, then input the IP
address, subnet mask, and other required information. For details, see
the Administrator's Guide.
When using a proxy server to directly connect from the intranet to the
Internet so that the printer may directly access the Internet for
firmware updates or similar, select Use, and set the server name and
port number.
The details are the same as displayed in General Settings - Scan
Settings - Email Server.
Used when you want to print from a folder. You must set up a shared
folder before printing from a folder.
"Printing Files from a Shared Folder (Print from Folder) (SC-
U
T5400M Series Only)" on page 100
Select whether to enable or disable the IPv6 function.
Normally, set this to Auto.
Select whether to enable or disable the function to auto-redirect HTTP
to HTTPS.
To enable IPsec/IP filtering functionality, use Web Config. For details,
see the Administrator's Guide.
To enable IEEE802.1X functionality, use Web Config. For details, see
the Administrator's Guide.
Set whether to enable or disable iBeacon Transmission. Set to enable
to be able to search from iBeacon-compatible devices.
159