Epson SC-T5400 Series User Manual page 154

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Settings item
Color Mode (Com‐
mon)
HP-GL/2 Unique Settings
(Print settings inherent to HP-GL/2 or HP RTL modes.)
Rotate
Origin Setup
Mirror Image
Using the Menu
Settings value Explanation
EPSON Standard Optimize the sRGB space and correct the color.
(sRGB)
* Perform color correction to sharpen your images based on the sRGB space.
Business Graphics
GIS Perform color correction suitable for when printing GIS (Geographic
Information System) topographical maps or similar.
Line Drawing Perform color correction suitable for CAD drawings and other line drawings.
Off (No Color Do not perform color correction.
Management)
*
You can rotate the coordinates of the drawn data counterclockwise in units
0˚
of 90˚ before printing. Note that objects drawn by RTL are not rotated. When
both this setting and the RO command specify rotation, rotation is
90˚
performed using the combined amount of both values. Note that rotation
180˚ by the RO command is for objects only (the arrow section in the following
illustration), and rotation is not performed for the drawn area (the square
270˚
section in the following illustration). As a result, objects in a section that
protrude from the drawn area are not printed.
* Set the data coordinate origin.
Left Edge
Center
On Select whether to flip horizontally (mirror) using the center of the output
size width as the basis line and then print (On) or print without flipping
*
horizontally (Off).
Off
If an angle is specified for rotate, the rotated result is flipped horizontally.
154