Printer Status/Print - Epson SC-T5400 Series User Manual

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Settings item
Replace Maintenance
Box
Replace Cutter
Powerful Cleaning
Discharging/Charging
Ink

Printer Status/Print

Settings item
Print Status Sheet
Configuration Status Sheet
Network
Using the Menu
Settings value
Display procedure
Start
Start
Start
Settings value
Explanation
Select when replacing the Maintenance Box while confirming the
procedure. If you are familiar with replacement and do not need to
confirm the procedure, you can replace the Maintenance Box without
selecting this menu item.
"Replacing Maintenance Box" on page 188
U
Select to replace the cutter if the paper is not cut cleanly. Follow the
on-screen instructions to replace.
"Replacing the Cutter" on page 189
U
Check the remaining amounts of ink cartridges and the amount of
empty space in the Maintenance Box and provide new ink cartridges
and Maintenance Box in advance if they are low.
If the nozzles are still clogged after performing this, turn off the printer
and leave it overnight or longer. When left for some time, the clogged
ink may dissolve.
If the nozzles are still clogged, contact your dealer or Epson Support.
The print head may fail if the environmental temperature becomes
-10˚C or lower. Perform this action if you expect to be transporting/
storing the printer in an environment of -10˚C or less.
Touch Start, and follow the on-screen instructions to discharge the
ink.
When operations are complete, the power turns off automatically.
"Handling if Transporting/Leaving the Printer in an Environment
U
of -10˚C or Less" on page 231
Explanation
Print a list of current printer settings. Use this to view all information at
a glance.
Display current network settings details. Displayed details are the
same as displayed in General Settings - Network Settings -
Network Status.
164