Epson SC-T5400 Series User Manual page 226

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Before Printing on Commercially Available Paper
When using commercially available paper, select the paper type setting that matches to the paper from the following
settings.
❏ Plain paper
❏ Coated Paper(Generic)
❏ Photo Paper(Generic)
❏ Tracing Paper
❏ Tracing Paper <LowDuty>
❏ Matte Film
❏ Blueprint Paper
Refer to the following if there is banding, wrinkling, smearing, or uneven colors in the printing results.
"The prints are not what you expected" on page 196
U
When using Commercially Available Synthetic, Canvas or Film-type Paper
Before printing, carry out one of the following.
❏ Add as a new paper type setting (register as custom paper), and carry out media adjust.
From the Home screen, touch Settings - General Settings - Printer Settings - Custom Paper Setting, and
register a custom paper. After registering the paper, perform Media Adjust. Paper adjustment results will be saved
as the newly added paper type settings.
Refer to the following menu for details on custom paper settings.
"General Settings - Printer Settings" on page 145
U
❏ Select the paper type from the following Epson Special Media settings, and perform Media Adjust.
Enhanced Adhesive Syn., Enhanced Low Adh. Syn., Heavyweight Polyester, Glossy Film2, Backlight Film Roll
By performing the Media Adjust, paper settings for Epson Special Media will be overwritten by the settings for the
paper you use.
There are automatic and manual paper adjustments. We recommend manual adjustments for Synthetic, Canvas, or
Film-type Paper. If automatic adjustments are made, an error may occur or the effect of adjustment may be minimal.
"Paper Feed Adjust (Manual) Procedure" on page 198
U
"Print Head Alignment (Manual) Procedure" on page 198
U
Note:
Test the print quality with this printer before purchasing a large amount of paper.
Appendix
226