Epson SC-T5400 Series User Manual page 148

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Settings item
Custom Paper Setting
(Touching any of registry number 01 to 10 will display settings items.)
Change Name
Change Reference
Paper
Advanced Media Setting
Platen Gap
Top/Bottom Mar‐
gins
Using the Menu
Settings value Explanation
Register and change the name of the custom paper settings. The name
registered here is displayed in the Paper Type list.
Touch this to display the keypad screen. Up to 20 characters may be input
for the name. The keypad screen can be switched as shown below with the
button marked.
Touch the icons at bottom left to switch between input methods.
ABC: Enters alphabet letters.
123#: Enters numbers and symbols.
To change the key layout of the full keyboard, use Keyboard in the Basic
Settings menu.
U
*
You can select the media type that is the closest to the paper you are using.
Plain paper
Matte Paper
Photo Paper
CAD
Others
1.2 This is the Platen Gap (distance between print head and paper) for the paper
selected in Change Reference Paper, so it does not normally need to be
1.6
changed. Change this to a setting that will widen the gap (a higher value) if
print results are smeared.
2.1
*
Setting this to Standard will set the top/bottom margins as follows
Standard
depending on the printer driver print targets.
Top 3 mm/Bottom 3
❏
mm
❏
Top 15 mm/Bottom
Left and right margins will remain at 3 mm regardless of settings. If there is
15 mm
any soiling on the top section of the print results, increase the top margin.
Top 35 mm/Bottom
U
15 mm
"General Settings - Basic Settings" on page 143
CAD/Line Drawing: 3 mm/3 mm
Other: 30 mm/30 mm
"Printable area" on page 227
148