Epson SC-T5400 Series User Manual page 16

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Touch this button when loading, removing, setting,
or adjusting paper.
❏
See the following for more details on Roll Paper.
"Loading and Removing the Roll Paper" on
U
page 35
Menu descriptions U
page 136
❏
See the following for more details on Cut Sheet(1
sheet).
"Loading and Removing Cut Sheet(1 sheet)" on
U
page 42
Menu descriptions U
page 140
D
Printer Status menu button
Touch this button when you want to check the status
of consumables or details of displayed notifications.
"Printer Status menu" on page 142
U
E
Settings menu button
Touch this button when you want to perform
maintenance or configure the printer operation
settings, network settings, or other settings. See the
following for more details.
"Settings menu" on page 143
U
F
Information icon
When there are notifications, such as consumable
remaining amount low warnings, the number of
notifications is indicated by a badge at the top right
of this icon. If you touch this icon when the badge is
displayed, a list of the notifications that require your
action is displayed. Touching each item displays
instructions on what to do. If you do not perform the
actions, the badge will not disappear.
G
Network icon
The network connection status is indicated by an
icon as shown below.
Touching the icon allows you to switch the network
connection status.
"Changing the Network Connection Methods"
U
on page 32
Not connected to a wired LAN or the
wired LAN or wireless LAN not set.
Introduction
"Roll Paper menu" on
"Cut Sheet(1 sheet) menu" on
Connected to a wired LAN.
Wireless LAN (Wi-Fi) is disabled.
Searching for SSID, IP address not set, or
signal strength is 0 or poor.
Connected to a wireless LAN (Wi-Fi).
The number of lines indicates the signal
strength. The more lines there are, the
better the signal strength.
Wi-Fi Direct (simple AP) connection is
disabled.
Wi-Fi Direct (simple AP) connection is
enabled.
H
Consumables status icon
Estimates of the remaining amounts of ink
cartridges and the empty space in the Maintenance
Box are indicated by the length of the bars. The
shorter a bar is, the lower the remaining amount of
ink or space.
When is displayed, the remaining amount of the
corresponding ink cartridge or the amount of empty
space in the Maintenance Box is low. Touching the
icon displays the consumables status screen so that
you can check the ink cartridge and Maintenance
Box product numbers. This is a shortcut button for
Supply Status in the Printer Status menu.
"Printer Status menu" on page 142
U
16