Feeding Or Ejecting Problems - Epson SC-T5400 Series User Manual

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Is ink dry on the printed surface?
o
Depending on the printing density and media type,
the ink may take a while to dry. Do not stack the paper
until the printed surface is dry.
Additionally, setting the drying time on the printer in
Roll Paper - Advanced Media Setting - Drying Time
- Drying Time per Page to a longer time will stop
post-print processing (ejection, cutting), waiting for
the paper to dry naturally.
"Roll Paper menu" on page 136
U
Blurred text, lines, and images
Is the Media Type setting correct?
o
Confirm that the paper type selected with the printer
matches the paper being used, and that the printer
driver Media Type settings are Use Printer Settings.
The amount of ink to be fired is controlled according
to the media type. If the settings do not match the
paper loaded, too much ink may be fired.
"Setting Loaded Paper" on page 44
U
Is the Color Density setting appropriate?
o
On the printer driver Advanced screen, click Paper
Configuration, and decrease the ink density. The
printer may be printing with much ink for some paper.
We recommend that black and color densities be
decreased similarly.
Are you printing on tracing paper?
o
If too much ink is discharged, on the printer driver
Advanced screen, click Paper Configuration, and
decrease the ink density. Alternatively, changing
Paper Type to Tracing Paper <LowDuty> may result
in an improvement.
Printed over the barcode for Manage
Remaining Amount
Depending on the paper, the printer may not
o
be able to read the barcode for Manage
Remaining Amount.
Set Setup to Off to use the printer. Touch, in order from
the Home screen, Roll paper information area -
Manage Remaining Amount, and then change
Setup from On to Off.
Problem Solver

Feeding or ejecting problems

Unable to feed or eject paper.
Is the paper loaded in the correct position?
o
See the following for the correct paper loading
positions.
"Loading Roll Paper" on page 35
U
"Loading Cut Sheet(1 sheet)" on page 42
U
Is the paper loaded in the correct direction?
o
Load cut sheets vertically. If they are not loaded in the
correct direction, the paper may not be recognized
and an error may occur.
"Loading Cut Sheet(1 sheet)" on page 42
U
Is the paper wrinkled or creased?
o
Do not use old paper or paper with creases in it.
Always use new paper.
Is the paper damp?
o
Do not use paper that is damp. Also, Epson special
media should be left in the bag until you intend to use
it. If it is left out for a long time, the paper curls up and
gets damp so that it does not feed properly.
Is the paper wavy or curled?
o
If changes in temperature and humidity cause paper
to become wavy or curled, the printer may not be able
to recognize the paper size correctly.
Check the following points.
❏
Load the paper just before printing.
❏
Do not use wavy or curled paper.
For roll paper, cut off the wavy or curled parts and
then load it again.
For cut sheets, use new paper.
"Notes on Loading the Paper" on page 34
U
Are the edges of the roll paper uneven?
o
Loading roll paper with the right and left edges
uneven may cause paper feeding problems or paper
meandering may occur during printing. Rewind the
paper to make the edges even before using roll paper
or use roll paper with no problem.
"Notes on Loading the Paper" on page 34
U
208