X500 Drive-Cliq Interface - Siemens SINAMICS S120 Manual

9.10.3.5

X500 DRIVE-CLiQ interface

Table 9-36
Connector
type
Power consumption max. 0.30 A
The blanking cover for the DRIVE-CLiQ port to secure the degree of protection IP 67 is not included in the
scope of delivery.
Blanking covers (6 units), article number: 6SL3066-4CA01-0AA0
Note
Only MOTION-CONNECT DRIVE-CLiQ cables may be used for connections. The maximum cable
length is 100 m for MOTION-CONNECT 500, and 75 m for MOTION-CONNECT 800PLUS cables.
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
X500: DRIVE-CLiQ interface
Pin Signal name
1 TXP
2 TXN
3 RXP
4 Reserved, do not use
5 Reserved, do not use
6 RXN
7 Reserved, do not use
8 Reserved, do not use
A + (24 V)
B M (0 V)
DRIVE-CLiQ socket
Encoder system connection
9.10 Sensor Module External SME120
Technical data
Transmit data +
Transmit data -
Receive data +
-
-
Receive data -
-
-
Power supply
Electronics ground
291