Voltage Sensing Module VSM10
8.7 Installation
8.7
Installation
Installation
1. Tilt the component backwards slightly and attach it to the DIN rail using the hooks.
2. Swivel the component onto the DIN rail until you hear the mounting slide at the rear latch
into position.
3. Slide the component along the mounting rail to either the left or the right into its final
position.
Removal
1. First shift the mounting slide downwards at the lug to release the interlocking with the
mounting rail.
2. Swivel the component to the front and withdraw it upwards from the DIN rail.
①
②
Figure 8-6
224
Mounting slide
Mounting rail
Removing from a DIN mounting rail
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2