Control Units and operating elements
4.5 Mounting Control Units
6SL3040-1MA00-0AA0
Response time
Ventilation clearances, above/below
Weight
4.5
Mounting Control Units
4.5.1
Mounting to a Line Module
Mounting a CU320-2 Control Unit directly on a Line Module, booksize or chassis format
You must attach three support brackets to a Line Module in order to mount a Control Unit directly
on it. The support brackets are supplied in the Line Module accessories kit.
Table 4-31
1. Insert the first support bracket
into the mounting opening pro‐
vided at the Line Module.
86
Mounting support brackets for a Control Unit onto a Line Module
2. Insert the support bracket up
to the end stop using a suitable
tool (screwdriver).
Unit
Value
The response time of digital inputs/outputs depends on the
evaluation (refer to the function diagram).
More information is provided in the following reference:
Reference: SINAMICS S120/S150 List Manual, Chapter "Func‐
tion diagrams/CU320-2 input/output terminals"
mm
80
kg
2.2
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
3. Mount the additional support
brackets as described under
Points 1 and 2.