Recycling And Disposal - Siemens SINAMICS S120 Manual

Shock test
Installation altitude
A product packaging (storage packaging) is an individual packaging for storage - and does not comply with requirements for
1)
transport. As a consequence, the product packaging is not suitable for shipping.
Transport packaging is either packaging that is directly suitable for transport, or secondary packaging, which together with
2)
the product packaging, satisfies the requirements for transport.
Table 3-4 Certificates
Declarations of Conformity
Certifications
1)
Possible deviations are specified for the corresponding component.
1)
3.7

Recycling and disposal

For environmentally friendly recycling and disposal of your old device, please contact a company
certified for the disposal of electrical and electronic waste and dispose of the device in
accordance with the regulations in your country.
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
According to IEC 60068-2-27 test Ea (half-sine)
• 25 g peak acceleration
• 6 ms duration
• 1000 shocks in all three axes in both directions
0 ... 1000 m without derating
> 1000 ... 4000 m
• Reduction of the output current by 10 % per 1000 meters, or
• Reduction in the ambient temperature by 5 °C per 1000 meters
> 2000 ... 4000 m
• Operation on line supply systems with grounded neutral point, or
• Operation on an isolating transformer with secondary grounded neutral point
EU declaration of conformity (Low Voltage Directive, EMC, Machinery Directive, RoHS),
China RoHS, RCM, Morocco
cULus, cURus, KC, EAC
System overview
3.7 Recycling and disposal
41