Protective Conductor Connection And Shield Support; Technical Data - Siemens SINAMICS S120 Manual

Terminal Modules
6.7 Terminal Module TM120
6.7.7

Protective conductor connection and shield support

The following diagram shows a typical Weidmüller shield connection clamp for the shield
supports.
1
①
②
Figure 6-28
NOTICE
Damage or faulty operation due to incorrect shielding or inadmissible cable lengths
If the correct shielding procedures or the permissible cable lengths are not observed, it can
cause damage or the machine may malfunction.
• Only use shielded cables.
• Do not exceed the cable lengths stated in the technical data.
6.7.8

Technical data

Table 6-53
6SL3055-0AA00-3KA.
Electronics power supply
Voltage
Current (without DRIVE-CLiQ)
Power loss
Maximum cable length
Protective ground conductor connection
Ventilation clearances, above/below
Weight
186
2
Shield connection terminal, Weidmüller company, type: KLBUE CO1, Article number:
1753311001
Protective conductor connection M4 / 1.8 Nm (15.9 lbf in)
Protective conductor connection and shield support
Technical data
Unit
V
DC
A
DC
W
m
At the housing with M4 screw
mm
kg
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
Value
24 (20.4 ... 28.8)
≤0.2
≤4
30
50
0.41