Advertisement
Clock
10:00
1/2
[Time]
2012-11-21 10:00:05
[Format]
YYYY-MM-DD HH:mm:ss
_[ActiveSyncSrc]
SNTP
ActiveSyncSrc
10:48
192. 168.
0. 100
192. 168.
0. 101
*192. 168.
0. 102
192. 168.
0. 103
Time zone
(ii)
The user can input time zone designated by UTC in Time zone screen. Time zone according as
local area for the IED should be set. Figure 12.7-3 shows the Time Zone screen:
Time Zone
10:48
1/1
_Time zone
+
0.00hour
Time synchronization
(iii)
Time synchronization source can be selected in Time synchronization screen. The
synchronization function can be activated by configuration of the On/Off switch in this menu.
Figure 12.7-4 shows the configuration screen for the time synchronization function:
Figure 12.7-4 Time synchronization setting
(1) Move cursor to the [ActiveSyncSrc] menu and press ►.
+
*Note: When the active synchronizing source is not SNTP, the >
is not shown in the screen.
>
(2) The ActiveSyncSrc screen shows the active IP address of
active SNTP server.
Time Zone
10:48
Time zone
0.00hour
Figure 12.7-3 Time zone setting screen
(1) Move cursor to the Time zone menu and press ENTER.
Time zone can be set by 0.25 hour. The user has to fill the Time
zone in accordance with UTC (Coordinate Universal Time).
Time Sync
10:48
TimeSyncSrc
SNTP
SNTP
On
BI SYNC
On
- 1018 -
1/1
+
1/4
+
+>
+>
6F2T0207 (0.01)
GRE200 (5,6)
Advertisement
