Advertisement
Oct.
4
Start
Control field
5
6
Address
7
Type identification (Type ID)
8
Variable structure qualifier
9
Cause of transmission (COT)
10
Common address of ASDU
11
Function type (FUN)
12
Information number (INF)
Double point information (DPI)
13
14
Millisecond (low)
15
Millisecond (high)
16
Minutes + Invalid flag (MSB)
17
Hours + Summer time flag (MSB)
Supplementary information (SIN)
18
Checksum
19
20
End
Any comment within 16 characters can be entered. This setting does not affect the function
in the IEC 60870-5-103 communication.
Description
Any comment within 16 characters can be entered. This setting does not affect the function
in the IEC 60870-5-103 communication.
Type ID
Type ID=20 (General command) is fixed.
INF
Information number (INF) of the frame is set. The INF can be set to 0 to 255. When the
standard frame is provided†, the INF according to the standard is recommended. If the
frame out of standard is provided, the INF should be set referring Table 11.5-12 and the
appendix†.
†Note: For more information, see
1118).
Item
Table 11.5-12
INF category of Monitor direction
INF
0 to 15
16 to 31
32 to 239
240 to 255
Appendix: IEC 60870-5-103 interoperability
- 961 -
Value
68H
08H+ACD+
DFC
1-254
Setting from the relay
1
Customized by GR-TIEMS
81H
20/21
Customized by GR-TIEMS
1-254
Linked with Address setting
0-255
Customized by GR-TIEMS
Customized by GR-TIEMS.
0-255
Answer back of receiving
command INF
Answer back of receiving
1/2
command DCO
0-59999
0-59+80H
0-23+80H
Answer back of receiving
0-255
command RII
16H
Category
system functions
status
not used
generic functions
6F2T0207 (0.01)
Remarks
(→page
GRE200 (5,6)
Advertisement
