Toshiba GR-200-5 Instruction Manual page 645

1/2 size case
5.2.2
Unit structure
(i)
The unit structure is shown in Figure 5.2-2 (a). A unit is made of VCT, CUP and BIO modules.
They are jointed using HMI front panel. A case will be used to cover the unit. UBS port is
provided for the maintenance.
Rear view
(ii)
Figure 5.2-2 (b) and (c) show the rea view and schematic diagram of the rear view. VCT is
mounted at terminal label "VT". IO module "IO#1" is mounted at terminal labels "T1 and T2"†,
whereas the other IO modules are mounted at "T3" and "T4". Communication modules are
mounted at terminal labels "C1, C2, and C3"‡.
Slot identifiers IO#2 IO#3
Terminal
T4 T3
label
Short wire
b. Rear view
†Note: IO#1-1 is mounted at "T1" and "IO#1-2" is mounted at "T2" (see Chap. 5.6 for
more details).
‡Note: For the communication modules, see Chap. 5.5 for more details).
BIO
VCT BIO CPU BIO
USB
IO#1-2 IO#1-1
T2
T1
C3
C1 C2
FG terminal
Ground terminal
Figure 5.2-2 Slot and terminals in 1/2 size case
BIO
Case
a. Unit structure
VCT
VC
[IO#2]
T4
Probe
- 625 -
6F2T0207 (0.01)
Terminals
[IO#3]
[IO#1]
T3
T2
C3
C1
FG
c. Schematic diagram
GRE200 (5,6)
T1 VC
C2
E