Toshiba GR-200-5 Instruction Manual page 395

are required to be mapped for IEC 61850 communication
Object_reference
Ctrl/LLN0$LEDRs$origin
Ctrl/LLN0$LEDRs$origin
Ctrl/LLN0$LEDRs
Ctrl/LLN0$LEDRs
Ctrl/LLN0$LEDRs
Ctrl/LLN0$LEDRs
Note: "Status (ST)" is defined in the function constraint (FC) of the IEC 61850.
Figure 3.4-13 orCat attribute mapped for LEDRs object of LLN0
Mapping input data
(iii)
The LEDR function can receive three commands "select, operate, and cancel". Thus, the user
should map the input-point "LED
3.4-5
shows
"Ctrl/LLN0$LEDRs"
attributes CO and CF†
†Note: The attribute is defined in the IEC 61850; "CO" stands for "Control" and "CF"
stands for "Configuration" in the functional constraint (FC).
Table 3.4-4 Mapping signals for SPC object
Attribute
orCat orCategory
orIdent Octet64
stVal BOOLEAN
q Quality
t Timestamp
stSeld BOOLEAN
01_CONTROL_REQ"
the input-point "LED01_CONTROL_REQ"
; the user should map the input-point to the Object references having
Figure 3.4-14 shows how to map a signal.
.
Type FC Signal Number
ST 5280013107011008
ST 5280016A07011009
ST 5280013107011EA1
ST 3010013110041005
ST 2003019010001006
ST 5280010007011001
to the IEC61850 communication
- 375 -
6F2T0207 (0.01)
Signal Name
LEDR01_ORCAT
LEDR01_ORIDENT
LED_RST_CMD
Qual_Val
SYS_TIME
LEDR01_STSELD
and the Object reference
GRE200 (5,6)
Table
.