Toshiba GR-200-5 Instruction Manual page 884

Protocol selection
LAN modules are provided for the IEC61850 and other communication†, and an optional serial
module‡ will be provided for the Modbus RTU or IEC60870-5-103 slave communication.
Figure 11.1-1 illustrates the IED has IEC61850, IEC103 and Modbus, and the user can select
one of them using SLAVE PROTOCOL§ setting of Setting sub-menu. IEC61850 and others
have its own settings. For example, the IED has settings, such as GOOSE and authentication,
for the IEC61850.
Communication
10:48 1/7
LAN >
USBCOM >
RS485 >
SLAVE PROTOCOL >
IEC61850 >
IEC103 SLV >
MODBUS >
Figure 11.1-1 Protocol selected by SLAVE PROTOCOL setting
†Note: The number of the communication protocol embedded in an IED is depending on
the software selection of that IED, which the user can identify using an ordering
code at positon U on page 1133. See
supported here (even though the DNP3.0 is displayed on the LCD).
‡Note: We have discussed that optional communication interface on page 645. See
Technical description: Signal processing and communication module
§Note: When changing Slave Protocol to "IEC61850", need to GR-200 IED restarts after
changing this setting item. Please change this item with caution.
CNM_SLAVE (Function ID: 300001)
Setting item
Slave Protocol IEC61850 / IEC103 / Modbus
Element ID Name
3100013406 ProcType
SLAVE PROTOCOL
10:48
Slave Protocol
IEC61850
Appendix: Ordering
Range
Protocol selection
Description
A type of the protocol selected in the IED
- 864 -
SLAVE PROTOCOL
1/1 10:48
+ IEC61850
IEC103
DNP3.0†
Modbus
. The DNP3.0 is not
Contents
6F2T0207 (0.01)
1/4
.
Default setting value
IEC61850
GRE200 (5,6)