NEC DSX Software Manual page 140

Direct Inward Line
Programming
Basic Programming
1. Check the DIL's circuit type.
1. In 3101-01: Line Type (page 809), check to be sure the line's circuit type matches the connected service.
2. In 3101-03: DTMF Dialing (page 811), indicate whether the line is DTMF ( 1 ) or Dial Pulse ( 0 ).
2. Assign the DIL day and night mode terminations (answering points).
In the day:
1.
- In 3112-01: Direct Termination in the Day (page 819), assign the DIL day mode termination. The
2. At night:
- In 3112-04: Direct Termination at Night (page 820), assign the DIL day mode termination. The
3. Set up night keys for the DIL.
1. For a line terminated to Key Ring or a Ring Group master number during the day:
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter 18 .
- In 2121-[01 to 24]: Feature Key Data (page 758), press CLEAR .
For a line terminated to a UCD Group master number or voice mail during the day:
2.
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter 18 .
- In 2121-[01 to 24]: Feature Key Data (page 758), enter the UCD Group or voice mail master number.
For a line terminated to the extension during the day:
3.
- Use the DND key.
4. Be sure the extension has the ability to put the system in the Night Mode.
- In 2102-01: Class of Service (page 724), check the extension's Class of Service level.
- In 1402-05: Activate Night Mode (page 634), enter Yes .
110 ◆ Features
assignment can be:
- An extension
- A UCD Group master number
- The voice mail master number
- A Ring Group master number
assignment can be:
- An extension
- A UCD Group master number
- The voice mail master number
- A Ring Group master number
DSX Software Manual