903X-Swap Ports; 9031-Station Swap - NEC DSX Software Manual

903x-Swap Ports

9031-Station Swap

Description
Use this program swap two extensions. This swaps all the programming between the two extensions, includ-
ing the extension number and station name. With 9031-Station Swap, it is no longer necessary to install and
wire cross-connect blocks to easily swap two extensions.
Options
9031-01: Station Swap
(Swap with Ext)
This option allows you swap two extensions. This swaps all the programming between the two extensions. If
the extension being swapped is a 2PGDAD Module Door Box port with the secondary port assigned, this
program will also swap the secondary port.
Features
• None
IntraMail Features
• None
Options
• See below.
Default
• None
To swap two extensions:
1. Access option 9031-01.
Press TRANSFER and select the first extension.
2.
3. Press HOLD and enter the second extension.
Press HOLD again to make the swap. You see:
4.
• You cannot swap an extension busy on a call.
DSX Software Manual
Using 9031-01: Station Swap
Swap Complete!
90xx-Utilities
903x-Swap Ports
9031-Station Swap
Maintenance Options: 9001-9211 ◆ 925