NEC DSX Software Manual page 223

Operation
Placing and Transferring Ring Group Calls
Placing an Intercom Call to a Ring Group
To make an Intercom call to a Ring Group:
1. Lift handset and press
2. Dial the Ring Group number (e.g., 600).
Wait for co-worker to answer.
3.
• If all Ring Group members are busy, your call will continue to ring until a group member becomes free.
To Transfer your call to a Ring Group:
1. Press .
INTERCOM
2. Dial the Ring Group number (e.g., 600).
Do one of the following:
3.
a. To screen (announce) the Transfer:
b. To have the call go through unscreened (unannounced):
c. To return to the call before a Ring Group member picks it up:
DSX Software Manual
INTERCOM .
Transferring a Call to a Ring Group
Wait for a Ring Group member to answer then press
Press TRANSFER .
• If your Transfer is unanswered, the call will return to you.
Press the flashing (green) line key.
Group Ring
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
TRANSFER .
Features ◆ 193