NEC DSX Software Manual page 419

Programming
Volume Settings
1. Should the system remember the volume settings you set for outside calls?
1. If yes, in 2111-07: Retain Line Volume Setting (page 732) enter
If no, in 2111-07: Retain Line Volume Setting (page 732) enter
2.
Display Backlight and Key Pad Illumination Controls
2. Set up the telephone display backlight and key pad illumination controls.
1. These options do not apply to 24-button keysets since they have neither backlit displays nor illuminated
key pads.
In 2104-01: Backlight Brightness While Active (page 729), set the telephone's backlight brightness while
2.
it is active.
- 0
- 1
In 2104-02: Backlight Brightness While Idle (page 729), set the telephone's backlight brightness while it
3.
is idle.
-
0
- 1
4. In 1605-05: Backlight Idle Timer (page 681), set how long (
before it reverts to its idle backlight brightness setting.
In 2104-03: Key Pad Illumination (page 729), enable (
5.
- If enabled, the key pad will illuminate when the backlit display is active.
Other Related Features
Features
Alphanumeric Display (page 21)
While a feature is active, pressing a
telephone is idle, pressing a
returns the user-set contrast setting to a median level.
Call Waiting / Camp-On (page 58)
The extension user cannot adjust the volume of incoming Camp-On tones.
Intercom (page 211)
The default Intercom (station-to-station) gain is 0 dB. While on an Intercom call, use
Volume Down
IntraMail Features
None
DSX Software Manual
Volume, Brightness, and Contrast Controls
for backlight off
- 8 for relative brightness settings 1-8
for backlight off
- 8 for relative brightness settings 1-8
VOLUME
to change this setting.
Yes
.
No
1 - 99 seconds) an extension must be idle
) or disable (
1
VOLUME key adjusts the volume of the active feature. While the
key adjusts the display contrast. A system reset or power down
.
) the key pad illumination.
0
Volume Up
Features ◆ 389
and