NEC DSX Software Manual page 59

Programming
1. Is the interval between Auto Redial callout attempts correctly set?
1. If yes, leave 1602-06: Repeat Redial Timer (page 673) at its current setting.
2. If no, change 1602-06: Repeat Redial Timer (page 673) to meet the site requirements.
2. Is the system waiting an adequate time for busy tone when handling an Auto Redial?
1. If yes, leave 1602-07: Repeat Redial Busy Timer (page 673) at its current setting.
2. If no, change 1602-07: Repeat Redial Busy Timer (page 673) to meet the site requirements.
Other Related Features
Features
Last Number Redial (page 219)
Last Number Redial allows an extension user to quickly redial the last outside number dialed.
IntraMail Features
None
Operation
To enable Auto Redial:
1. Place an outside call and receive busy tone.
[Auto Redial]
2.
[Alnd]
You see: WAITING (30 SEC)
AUTO REDIAL 1 OF 15
3. The system periodically redials the call, up to 15 times.
Auto Redial cancels when you:
• Place or answer another outside call.
• Receive an Intercom voice announcement or answer an Intercom call by lifting the handset or
pressing
• Press
• Lift and replace the handset.
• Press the
If a Caller ID call rings while Auto Redial is enabled, your display will show the number and optional
name of the incoming caller. However, the ringing does not cancel Auto Redial. In addition, the Auto
Redial display will be restored after the Caller ID call stops ringing.
DSX Software Manual
Auto Redial
[Super Display Soft Key] - [Keyset Soft Key]
Press to enable Auto Redial.
• The system enables Auto Redial for the last outside call you dialed.
The display shows the interval between callout attempts (e.g., 30 seconds), as
well as how many times redial has occurred (e.g., 1 of 15).
•
SPEAKER
.
SPEAKER
SPEAKER to cancel Auto Redial.
soft key (Super Display only).
CANCEL
winks when your telephone has Auto Redial enabled.
Auto Redial
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Features ◆ 29