NEC DSX Software Manual page 245

Programming
1. Should extension have Key Ring for the outside line?
If yes:
1.
- In 2132-[01-64]: Line Ringing (page 764) enter one of the following:-
-
-
-
- For day mode Key Ring, in 3112-01: Direct Termination in the Day (page 819) press
- For night mode Key Ring, in 3112-04: Direct Termination at Night (page 820) press
- For delayed ringing, adjust 1604-01: Delay Ring Timer (page 678) as required.
If no, in 2132-[01-64]: Line Ringing (page 764) enter
2.
2. Optionally set up overflow to an alternate destination if the Key Ring line is not answered.
For day mode Key Ring overflow:
1.
- In 3112-02: Enable Day Overflow (page 819), enter
- In 3112-03: Day Overflow Destination (page 820) enter the day overflow destination. The destina-
tion can be:
- An extension
- A UCD Group master number
- The voice mail Automated Attendant (by entering the voice mail master number)
- A Ring Group master number
- Key Ring (by pressing
2. For night mode Key Ring overflow:
- In 3112-05: Enable Night Overflow (page 820) enter
- In 3112-06: Night Overflow Destination (page 821) enter the night overflow destination. The desti-
nation can be:
- An extension
- A UCD Group master number
- The voice mail Automated Attendant (by entering the voice mail master number)
- A Ring Group master number
- Key Ring (by pressing
3. Does Key Ring overflow occur after the correct interval?
In yes, leave 1601-01: Line No Answer Timer (page 669) at its current setting.
1.
2. If no, adjust 1601-01: Line No Answer Timer (page 669) as required.
4. After ringing the overflow destination, does Key Ring occur after the correct interval?
1. In yes, leave 1603-01: Transfer Recall Timer (page 675) at its current setting.
If no, adjust 1603-01: Transfer Recall Timer (page 675) as required.
2.
DSX Software Manual
1 for day and night ringing
for night only ringing
2
for delayed day and night ringing
3
CLEAR
CLEAR
(lamp only).
0
Yes .
)
.
Yes
)
Key Ring
CLEAR .
CLEAR .
Features ◆ 215