NEC DSX Software Manual page 235

Lift the handset and press
1.
2. Dial *4 .
Dial the number of the line that is on Hold.
3.
• For example, dial
To place an outside call on Exclusive Hold:
Press HOLD twice.
1.
• For you, the line key winks (on green) while on Hold, flashes slowly while recalling.
• For your co-workers, the line key is on red while on Hold, flashes slowly (red) while recalling.
If a call on Hold recalls, you see one of the following.
a.
b.
To pick up an outside call on Exclusive Hold:
Press the flashing line key.
1.
• The line key lights solid (green).
To place an Intercom call on Hold:
Press HOLD .
1.
• INTERCOM
To pick up an Intercom call from Hold:
1. Lift the handset
If you are not connected to the Intercom call, press
2.
To place an outside or Intercom call on Exclusive Hold:
• Single line telephones cannot place calls on System Hold.
1. Hookflash.
Dial *7 and hang up.
2.
• If you leave the call on Hold too long, it will recall to you.
• If you hookflash and hang up without dialing
• If you have a call on Exclusive Hold and have a Camped-On call waiting, dialing
call. See Split (Alternate) (page 323) for more.
DSX Software Manual
Using System Hold
.
INTERCOM
for line 1.
01
Using Exclusive Hold
If the extension that placed to call on Hold doesn't have a name:
Hold Recall
STA 301
If the extension that placed the call on Hold has a programmed name:
Hold Recall
300: Attendant
Using Intercom Hold
flashes with a double-wink (on green) while on Hold - slow flash (green) while recalling.
Using Hold at a Single Line Telephone
.
INTERCOM
, the call will recall immediately.
*7
Hold
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
*7 will answer the waiting
Features ◆ 205