161X-Coi (Analog Line) Timers; 1611-Incoming; 1611-01: Minimum Ring Detect Timer; 1611-02: Minimum Single Ring Detection Timer - NEC DSX Software Manual

16xx-Timers

161x-COI (Analog Line) Timers

1611-Incoming

1611-Incoming 161x-COI (Analog Line) Timers
Description
Use this program to adjust timers that affect incoming calls on the line (COIU) PCBs.
Options

1611-01: Minimum Ring Detect Timer

(Ring Detect)
Use this option to set the threshold for ring detection. If the ring signal is longer than this interval, the system
interprets the signal as valid ringing. If the signal is equal to or shorter than this interval, the system ignores
the ringing. Be sure the value you enter is compatible with the local telco. If you set this value too short, the
system may detect line spikes and anomalies as ringing. If too long, the system may not properly interpret a
valid ringing signal.
Features
• None
IntraMail Features
• None
Options
• 8-2040 mS
Default
• 104 mS

1611-02: Minimum Single Ring Detection Timer

(Single Ring Min)
The system uses this option to detect valid ringing signal from the connected telco or PBX. Valid single ring
must be longer than this interval.
Features
• None
IntraMail Features
• None
Options
• 8-2040 mS
Default
• 1216 mS
682 ◆ System Options: 1001-1702
DSX Software Manual