1403-Slt's (Single Line Telephone Options); 1403-01: Flash For Single Line Set; 1403-02: Single Ring For Single Line Set; 1403-03: Special Dial Tone For Single Line Set - NEC DSX Software Manual

1403-SLT's (Single Line Telephone Options)

Description
Use this program to customize single line telephone Class of Service options.
Options

1403-01: Flash for Single Line Set

(Flash for SLT)
Use this option to enable or disable hookflash for analog single line extensions.
Features
• Flash (page 177)
IntraMail Features
• None
Options
•
No
• Yes
Default
• Yes

1403-02: Single Ring for Single Line Set

(Single Ring)
Use this option to determine the type of ringing at analog single line extensions. If enabled, analog single
line extensions always receive single ringing for outside calls. (Certain analog single line devices connected
to the system may require this type of ringing.) If disabled, line ringing at analog single line extensions fol-
lows the ringing pattern of the line. For example, if a line is ringing the system with two ring bursts, the sin-
gle line extensions will follow the same ringing pattern.
Features
• Central Office Calls, Answering (page 74)
• Single Line Telephones (page 305)
IntraMail Features
• None
Options
• No
• Yes
Default
• No

1403-03: Special Dial Tone for Single Line Set

(Special Dial Tone)
Use this option to enable or disable single line telephone Special Dial Tone. Note that this option has no
effect of keyset ports with the same Class of Service.
Features
• Message Waiting (page 238)
IntraMail Features
• None
DSX Software Manual
(0) - Disabled
(1) - Enabled
(1) - Enabled
(0) - Disabled
(1) - Enabled
(0) - Disabled
14xx-COS (Class of Service)
1403-SLT's (Single Line Telephone Options)
System Options: 1001-1702 ◆ 635
140x-Station