2115-Hunting And Overflow Options; Sample Hunt Group Programming - NEC DSX Software Manual

2115-Hunting and Overflow Options
Description
Use this program to set the Extension Hunting and DID Intercept options for the extension (station).
If programming multiple extensions, you may find 9021-Station Copy (page 921) a handy time-saving tool.

Sample Hunt Group Programming

Circular Hunting
2115-01: Hunt Type
2115-01: Hunt Destination
1603-01: Transfer Recall Timer
1601-02: DIL No Answer Timer
Terminal Hunting
2115-01: Hunt Type
2115-01: Hunt Destination
1603-01: Transfer Recall Timer
1601-02: DIL No Answer Timer
DSX Software Manual
Circular Hunting Programming (for 301, 303 and 304)
Enter the same Hunt Type for all three extensions:
1 = Ring No Answer Line
2 = Busy/Ring No Answer Line
3 = Busy/Ring No Answer All Calls
4 = Busy Line
301 303
303 304
304 301 (This causes hunting to loop back to 301)
This timer sets how long an outside call waits at a busy member
extension. It also sets how long a call rings each member extension
as it cycles through the group.
This timer sets how long a DIL rings its destination member exten-
sion before cycling through the group.
Terminal Hunting Programming (for 301 and 303)
Enter the same Hunt Type for all three extensions:
1 = Ring No Answer Line
2 = Busy/Ring No Answer Line
3 = Busy/Ring No Answer All Calls
4 = Busy Line
301 303
303 304
304 Press
CLEAR
This timer sets how long an outside call waits at a busy member
extension. It also sets how long a call rings each member extension
as it cycles through the group.
This timer sets how long a DIL rings its destination member exten-
sion before cycling through the group.
21xx-Configuration
2115-Hunting and Overflow Options
to undefine entry. (Hunting stops at 304.)
Station Options: 2101-2501 ◆ 745
211x-Options