NEC DSX Software Manual page 468

Automated Attendant, Built-In
Programming
1. Enable the Built-In Automated Attendant.
In 4101-01: Voice Mail Type (page 863), enter 1 .
1.
(Optional) If you want to upgrade the Built-In Automated Attendant to IntraMail:
2.
- Plug in the IntraMail CompactFlash Card.
- Reset the system.
- All system programming (Answer Tables, Dial Action Tables, etc.) will be retained.
- Any custom Instruction Menu messages will be unavailable.
2. Should extension be able to record the Instruction Menu message (greeting)?
If yes, in 2102-04: User Programming Access Level (page 725) enter 5 .
1.
If no, in 2102-04: User Programming Access Level (page 725) enter 1-4 .
2.
3. Assign Answer Tables to outside lines.
In 3131-02: IntraMail Answer Table Assignment (page 828), assign an Answer Table (1-8) to each line
1.
that the Automated Attendant should answer.
4. Set up the Automated Attendant to answer outside calls during the day.
In 3112-01: Direct Termination in the Day (page 819), enter 700 .
1.
Set up a UCD night key on your extension or DSS Console to control the day/night mode of lines termi-
2.
nated to voice mail during the day
- To set up a UCD night key on an extension:
- To set up a UCD night key on a DSS Console:
5. Set up the Automated Attendant to answer outside calls at night.
3. 3112-04: Direct Termination at Night (page 820), enter 700 .
4. Set up a System night key on your extension or DSS Console to control the day/night mode of the lines
terminated to Key Ring during the day
- To set up a System night key on an extension:
- To set up a System night key on a DSS Console:
6. Set up the Answer Tables.
1. See Answer Tables (page 420) for more.
7. Set up the Call Routing Mailboxes.
1. See Call Routing Mailbox (page 450) for more.
438 ◆ IntraMail Features
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter 18 .
- In 2121-[01 to 24]: Feature Key Data (page 758), enter 700 .
- In 2402-[01-60]: DSS Console Key Codes (page 801), enter 18 .
- In 2402-[01-60]: DSS Console Key Data (page 801), enter 700 .
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter 18 .
- In 2121-[01 to 24]: Feature Key Data (page 758), press CLEAR .
- In 2402-[01-60]: DSS Console Key Codes (page 801), enter 18 .
- In 2402-[01-60]: DSS Console Key Data (page 801), press CLEAR .
DSX Software Manual