Cpuc, Price Per Unit And Currency Table - Motorola G24 Guide Developer's Manual

Call Control

+CPUC, Price per Unit and Currency Table

This command sets the parameters of the Advice of Charge-related price per unit and currency
table found in the SIM file, EFPUCT. PUCT information is used to convert the home units (used
in +CAOC, +CACM and +CAMM) into currency units.
Command
Type
Set
Read
Test
The following table shows the +CPUC parameters.
<Parameter>
<currency>
<ppu>
<passwd>
Example
AT+CPUC=?
OK
AT+CPUC="GBP","0.125","2222"
OK
AT+CPUC?
+CPUC: "GBP","0.125"
3-60
Syntax Response/Action
+CPUC=<currency>, OK
<ppu>,<passwd>
+CME ERROR: <err>
+CPUC? +CPUC:
<currency>,<ppu>
+CME ERROR: <err>
+CPUC=? OK
Table 3-29: +CPUC Parameters
Currency code character set (3 characters) defined by +CSCS command.
"+CSCS, Select Terminal Character Set", page
If the string begins with an alphanumeric character, it may be entered with or without
quotation marks, for example, "GBP", "DEM".
Price per unit
A dot is used as a decimal separator (precision of 1/1000; 15 digit maximum), for
example,"2.667".
[See notes below]
SIM PIN2 password
Maximum string length is 8 characters. If this value is exceeded, the command
terminates in an error. If PIN2 is incorrect, "+CME ERROR: incorrect password" is
displayed.
AT Commands Reference Manual
Remarks
The Set command sets the price per
unit and the currency table. SIM PIN2
is required. The new value is retained
after a power cycle.
The Read command displays the
current price per unit and currency
table.
The Test command indicates whether
the +CPUC command is functioning.
Description
3-4.)
December 31, 2007
(Refer to