Motorola G24 Guide Developer's Manual page 213

Table 3-76: Layout of SMS-COMMAND in PDU Mode: (according to GSM03.40)
Reference
<TP-CDL>
<TP-CD>
Bit/s
0-1
2
3-4
5
6
7
December 31, 2007
Description
Command data length
Command data
Table 3-77: <fo> for SMS-SUBMIT Message
Reference
Message-Type-Indicator
TP-Reject-Duplicates
TP-Validity-Period-Format
TP-Status-Report-Request
TP-User-Data-Header-Indicator
TP-Reply-Path
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Length
1 BYTE
0-156 BYTES
Description
Parameter describing the message type.
0 1 SMS-SUBMIT (in the direction MS
to SC)
Parameter indicating whether or not the
SC shall accept an SMS-SUBMIT for an
SM still held in the SC which has the
same MR and the same DA as a
previously submitted SM from the same
OA.
0 Instruct the SC to accept an
SMS-SUBMIT as mention above
1 Instruct the SC to reject an
SMS-SUBMIT as mention above. In this
case an appropriate TP-FCS value will be
returned in the SMS-SUBMIT-REPORT.
Parameter indicating whether the TP-VP
field is present and in which format.
0 0 TP-VP field not present
1 0 TP-VP field present - relative format
0 1 TP-VP field present - enhanced
format - valid only in PDU mode
1 1 TP-VP field present - absolute format
Parameter indicating if a status report is
requested by the MS
0 A status report is not requested
1 A status report is requested
Parameter indicating whether the
beginning of the User Data field contains
a Header in addition to the short message
or contains only the short message
0 The TP-UD field contains only the
short message
1 The beginning of the TP-UD field
contains a Header in addition to the short
message
Parameter indicating that Reply Path is
set or not.
0 TP-Reply-Path parameter is not set
1 TP-Reply-Path parameter is set
3-129