SMS
+CSMP, Set Text Mode Parameters
This command is a basic command and is used to select values for additional parameters needed
when SM is sent to the network or placed in storage when TEXT mode is selected.
Command
Type
Set
Read
Test
The following table shows the +CSMP parameters.
<Parameter>
<fo>
<vp>
3-104
Syntax
Response/Action
+CSMP=[<fo>[,<vp>
OK
[,<pid>[,<dcs>]]]]
or:
+CMS ERROR: <err>
AT+CSMP?
+CSMP:
<fo>,<vp>,<pid>,<dcs>
OK
or:
+CMS ERROR: <err>
AT+ CSMP =?
OK
or:
+CMS ERROR: <err>
Table 3-56: +CSMP Parameters
first octet of GSM 03.40. in integer format. For details see +CMGW definitions.
The default value at power-up is 17 (Message type is: SMS-SUBMIT and relative VP
format).
Validity Period. depending on SMS-SUBMIT <fo>, TP-Validity-Period-Format bits
setting. Either in integer format (see
("yy/MM/dd,hh:mm:ss±zz").
If there is no correlation between the VPF and the VP value. an error message will be
returned.
AT Commands Reference Manual
Remarks
The set command selects values for
additional parameters needed when SM is
sent to the network or placed in storage
when text format message mode is
selected.
The read command returns the current
parameters value.
The test command just returns OK.
Description
Table
3-57) or in time-string format
December 31, 2007