Hardware Information; Hardware Information Commands; Cbc, Battery Charger Connection - Motorola G24 Guide Developer's Manual

Hardware Information

Hardware Information Commands

+CBC, Battery Charger Connection

This command enables a user to query the battery power level.
The following table shows the +CBC parameters.
Note:
Example
AT+CBC
+CBC: 0,60 //This example shows 0 (battery powered) with 60% power.
December 31, 2007
Command Type
Read
Table 3-124: +CBC Parameters
<Parameter>
<bcs> Battery status values
0 Battery powered
1 Externally powered - not implemented in G24
Note: The G24 input power source is connected via the battery pins
only, so it is always battery powered.
<bcl> Battery charge level:
VCC, V
>3.70
3.50-3.70
3.40-3.50
3.35-3.40
3.30-3.35
<3.30
The G24 does not allow the detection of battery use. The power supply of the G24 is
connected via the battery pins. However, users can use this command to verify the level
of the G24 input power source.
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Syntax Response/Action
+CBC +CBC:<bcs>,<bcl>
Description
Battery Level
90
60
20
10
5
0
3-193