Motorola G24 Guide Developer's Manual page 154

Call Control
The following table shows the +COLP parameters.
<Parameter>
<n>
<m>
<number>
<type>
<subaddr>
<satype>
<alpha>
Example
AT+COLP=0
OK
AT+COLP=2
+CME ERROR: Numeric parameter out of bounds
3-70
Table 3-36: +COLP Parameters
Sets/displays the result code presentation status of the G24.
0 Disable (default)
1 Enable
Displays the subscriber's COLP service status in the network.
0 COLP not provisioned
1 COLP provisioned
2 Unknown (for example, no network, and so on)
Sets the phone number, using the format specified by <type>.
Sets the address octet type in integer format (refer to GSM 04.08 [8] subclause
10.5.4.7).
129 Unknown
145 International (used when dialing string includes "+" international access code
character)
Sets the subaddress, using the format specified by <satype>.
Sets the address octet type in integer format (refer to GSM 04.08 [8] subclause
10.5.4.8).
An optional, string-type, alphanumeric representation of <number> corresponding to
the entry found in the phonebook. The character set is defined by +CSCS
"+CSCS, Select Terminal Character Set", page
AT Commands Reference Manual
Description
3-4).
December 31, 2007
(Refer to