Mipflush, Flush Data From Buffers - Motorola G24 Guide Developer's Manual

GPRS/EDGE

+MIPFLUSH, Flush Data from Buffers

This command causes the G24 to flush (delete) data accumulated in its accumulating buffers.
Command Type
Set
Read
Test
The following table shows the +MIPFLUSH parameters.
3-398
Syntax
+MIPFLUSH = <Socket ID>
+MIPFLUSH?
+MIPFLUSH=?
Table 3-267: +MIPFLUSH Parameters
<Parameter>
Socket ID 1,2,3,4 - Number of valid sockets
AT Commands Reference Manual
Response/Action
ERROR
or:
+MIPFLUSH: <Socket ID>
OK
+MIPFLUSH:[<socket ID>]
+MIPFLUSH=(<Socket ID>)
Description
December 31, 2007