General Audio Commands; Madigital, Analog/Digital Audio Switching - Motorola G24 Guide Developer's Manual

Audio

General Audio Commands

+MADIGITAL, Analog/Digital Audio Switching

This command switches between analog and digital audio modes. AT+MADIGITAL=1 switches
to digital audio mode, and AT+MADIGITAL=0 switches it back to analog mode.
Command
Type
Set
Read
Test
The following table shows the +MADIGITAL parameters.
<Parameter>
<mode>
Example
AT+MADIGITAL=?
+MADIGITAL: (0,1)
OK
AT+MADIGITAL?
+MADIGITAL: 0
OK
AT+MADIGITAL=1
OK
AT+MADIGITAL?
+MADIGITAL: 1
OK
AT+MADIGITAL=0
OK
AT+MADIGITAL?
+MADIGITAL: 0
OK
AT+MADIGITAL=3
ERROR
AT+MADIGITAL?
+MADIGITAL: 0
OK
3-244
Syntax Response/Action
+MADIGITAL= OK
<mode>
or:
+CME ERROR: <err>
+MADIGITAL? +MADIGITAL:<mode>
OK
+MADIGITAL=? +MADIGITAL:
<available audio modes>
OK
Table 3-160: +MADIGITAL Parameters
0 G24 works in analog audio mode.
1 G24 works in digital audio mode.
AT Commands Reference Manual
Remarks
The Set command toggles between analog
and digital audio modes.
The Read command returns the current
audio mode (analog or digital).
The test command returns the available
digital audio modes.
Description
December 31, 2007