Tpin, Query Number Of Remaining Sim Pin/Puk Entering Attempts - Motorola G24 Guide Developer's Manual

+TPIN, Query Number of Remaining SIM PIN/PUK Entering Attempts

This command returns the number of remaining attempts of entering the PIN and PUK for the
SIM card in use. The command returns the number of remaining attempts for PIN1 (CHV1),
PIN2 (CHV2), PUK1 (unblock CHV1) and PUK2 (unblock CHV2).
Number of available attempts is provider dependant. Typically it is 3 attempts for PIN, 10
attempts for PUK.
This command will return error if SIM is not inserted.
Command
Type
Read
The following table shows the +TPIN parameters.
<Parameter>
<chv1>
<chv2>
<unbl_chv1>
<unbl_chv2>
Example
AT+TPIN=?
+TPIN: 3,10,3,10
OK
AT+CPIN="7777"
+CME ERROR: incorrect password
AT+TPIN?
+TPIN: 2,10,3,10
OK
December 31, 2007
Syntax Response/Action
AT+TPIN? +TPIN:<chv1>,
<unb1_chv1>,<chv2>,
<unb1_chv2>
or
ERROR
Table 3-171: +TPIN Parameters
Number of remaining PIN attempts
Number of remaining PIN2 attempts
Number of remaining PUK attempts
Number of remaining PUK2 attempts
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Remarks
Description
3-257