Motorola G24 Guide Developer's Manual page 426

GPRS/EDGE
Command
Type
Test
3-342
Syntax
+CGEQREQ=? +CGEQREQ: <PDP_type>, (list of
supported <Traffic class>s) ,(list of
supported <Maximum bitrate
UL>s), (list of supported
<Maximum bitrate DL>s), (list of
supported <Guaranteed bitrate
UL>s), (list of supported
<Guaranteed bitrate DL>s),(list of
supported <Delivery order>s) ,(list
of supported <Maximum SDU
size>s) ,(list of supported <SDU
error ratio>s) ,(list of supported
<Residual bit error ratio>s) ,(list of
supported <Delivery of erroneous
SDUs>s) ,(list of supported
<Transfer delay>s) ,(list of
supported <Traffic handling
priority>s)
[<CR><LF>+CGEQREQ:
<PDP_type>, (list of supported
<Traffic class>s) ,(list of supported
<Maximum bitrate UL>s), (list of
supported <Maximum bitrate
DL>s), (list of supported
<Guaranteed bitrate UL>s), (list of
supported <Guaranteed bitrate
DL>s),(list of supported <Delivery
order>s) ,(list of supported
<Maximum SDU size>s) ,(list of
supported <SDU error ratio>s) ,(list
of supported <Residual bit error
ratio>s) ,(list of supported
<Delivery of erroneous SDUs>s)
,(list of supported <Transfer
delay>s) ,(list of supported <Traffic
handling priority>s)
[...]]
AT Commands Reference Manual
Response/Action Remarks
The test command returns
values supported as a
compound value. If the
MT supports several PDP
types, the parameter value
ranges for each PDP type
are returned on a separate
line.
December 31, 2007